Clare Controls ClareVision Plus, Руководство пользователя

Страница: 199 / 208

Appendix A
188 ClareVision Plus Network Video Recorder User Manual
Using the camera to connect a device remotely, with no NVR monitor
connection, is successful. Using a monitor (VGA or HDMI) to connect
devices is unsuccessful, resulting in a blank screen with a mouse cursor.
Prior to startup, connect the NVR to the monitor using VGA or HDMI.
Connect the device, locally or remotely, using CAMERA. The result
displays it is connected, but there is a blank screen with a mouse cursor
Possible reasons:
•
After connecting the CAMERA to the NVR, the image output is the main spot
interface by default.
Solution:
1. Enable the output channel.
2. Select Menu > Configuration > Live View > View, select video output interface
in the drop-down list, and configure the window you want to view.
Note: The view settings are only configurable by local NVR operation.
Different camera orders and window-division modes is set for different output
interfaces. Digit
“D1”and “D2” stands for the channel number, and “X” means
the selected window has no image output.
3. Verify that the steps used above solved the problem.
If it is solved, finish the process.
If not, contact the engineer to do further investigation.