Clare Controls ClareVision Plus Скачать руководство пользователя страница 161

Страница: 161 / 208

RAID

150

ClareVision Plus Network Video Recorder User Manual

2. Click the

Array

tab, and

then click

to configure the array rebuild.

Note:

At least one available physical disk should exist for rebuilding the array.

3. Select the available physical disk, and then click

to confirm rebuilding the

array.

The “Do not unplug the physical disk when it is under rebuilding” dialog
displays. Click

to start the rebuild.

You can enter the Array Settings interface and the Virtual Disk interface to view
the rebuilding status.

After rebuilding successfully, the array and virtual disk restore to Functional.

Deleting array

Deleting array deletes all data saved in the disk.

To delete the array:

1. Browse to the Array Settings interface.

Menu

HDD

RAID

Array

Содержание ClareVision Plus

















































































































































































































Результаты поиска

Содержание ClareVision Plus

Отзывы:

Clare Controls ClareVision Plus, Руководство пользователя, Страница: 161 / 208

Результаты поиска

Содержание ClareVision Plus

Отзывы: