ELECTRIC CREAM SEPARATOR FJ 600_v 6 USER`S MANUAL
Page 8
8.
SKIMMING REGULATION
8.1 SKIMMING REGULATION BY HEXAGONAL ADJUSTING SCREW
The cream separator is factory adjusted, so you get 10-12% of cream from whole milk volume
at milk temperature 30 - 45 ºC. If you want different density or volume of cream, you can
adjust hexagonal adjusting screw (placed in the plastic partition in bowl upper part).
If you want more density cream – smaller volume, you have to turn it towards right
(clockwise).
If you want less density cream – higher volume, you have to turn it towards left
(counter clockwise). In most cases it is enough to turn adjusting screw for ¼ of the
rotation.
Cream adjusting screw details and function
Smaller cream volume
and higher cream density
Higher cream volume and
Smaller cream density
8.2
SKIMMING REGULATION BY CHANGING SPEED
The cream separator is factory adjusted, that at 7500 RPM you get 0,015 % fat in the
milk. The speed can be reduced to 6000 RPM . With reducing the speed you increase percent
of the fat in the milk , and you increase percent of milk in the cream.
Always check if rubber washer is damaged or to much extended. In such case you have to
replace it with new one.
Please note!
You have to take care that not fix the adjusting screw to deep, because you can harm the
screw coil! You have to take care not to unscrew the regulation screw to much. If you
have done so, you will have problems by disassembling the plastic partition and the
upper part of the bowl.
