ELECTRIC CREAM SEPARATOR FJ 600_v 6 USER`S MANUAL
Page 6
6. TOP BOWL ASSEMBLING PROCEDURE
Put the rubber washer in to the groove of bowl bottom part.
Place the metal discs which are different regarding the placement of distance
embossment. Put different discs alternately one by one (disk 1 by disk 2). Do not use
force. With gently shaking and turning of the bowl bottom part all the discs will find
their place very easily.
Put the plastic partition in the upper part of bowl.
Make sure that mark »
0
« on upper and bottom part are in the same direction.
Screw the bowl fixing nut with hand and fix it strongly with the key. The marks »
0
«
must stay in the same direction. The fixing nut must be strongly fixed, because it is
exposed to high forces.
Bowl fixing nut
Upper part of bowl
“0” marks
Plastic partition
Metal disc assembly
Rubber washer
Bottom part of bowl
“0” marks
Please note!
The bowl fixing nut must be tightened well, because it is exposed to a considerable
pressure.
