Troubleshooting
26
8.
Troubleshooting
8.1.
Unsufficient Nitrogen pressure alarm
This alert is activated once that, because of an exceeding Nitrogen consumption
or of an insufficient inlet compressed air pressure, the pressure in the built-in
reservoir drops below the MINIMUM NITROGEN PRESSURE that has been set
To shut down the alarm, press the Function key
.
To exit from the alarm mode, the pressure inside the reservoir has to rise over
the minimum value (for example by reduding the Nitrogen flow rate or increa-
sing compressed air pressure).
8.2.
High compressed air alarm
When the inlet compressed air pressure exceeds 10 bar, the corresponding
alarm appears. In order to exit from alarm mode, switch off and turn on again
the generator.
