S 10 / S 15
16
Type
S 10-U
S 10-O
S 15-U
S 15-O
Order no.
42103
41103
42153
41153
Capacity
l
10
10
15
15
Energy efficiency class
A
B
Type of system (nom. pressure)
Pressure type, 8 bar
Inner container
Copper
Insulation
Polyurethane
Nominal loading at 230 V
kW
2,2
Nominal voltage 230 ~
V
~ 230
Rated current at 230 V
A
10
10
10
10
Water connections
inch
⅜
½
⅜
½
Mixed water capacity
1)
l
20
20
30
30
Temperature range
°C
5 - 80
5 - 80
5 - 80
5 - 80
Temperature selection
Control knob
Heating time for ∆t = 55 K
2)
min
17
17
26
26
Stand-by consumption
3)
kWh
0.34
0.30
0.49
0.43
Empty weight
4)
kg
6,5
6,5
7,5
7,5
Type of protection acc. VDE
IP 24
*) The declaration complies with the EU regulation No 812/2013. The product data sheet is attached at the end of this document.
1) Mixed temperature 40 °C with hot temperature 65 °C and cold temperature 15 °C
2) Cold water temperature 10 °C
3) Stand by power consumption with 55 °C / 24 h
4) The water capacity should be added to the weight
M
ax
3. Description of the appliance
4. Technical specifications
The electric water storage heater S 10 / S 15 contains an inner copper container for sup-
plying hot water to one or more taps situated in close proximity to one another, e.g.
kitchen sink or two wash basins. The technical specifications are listed below.
The water storage heater can be installed as closed-outlet (with safety module) or as
open-outlet (with a suitable low-pressure fitting) device.
The appliance is designed for installation above or below the sink and must be
installed according to the type only.
The water in the boiler is heated to the temperature set on the appliance and then
stored.
