5.Installation
5.Installation
P.10
P.11
Mounting accessories
For installations under difficult conditions, these
mounting accessories are available:
Mounting kit RDX
(Art. no. 34100)
The instant water heater can be installed by means
of this mounting kit in the below situations. The
power supply cable is coming out of the wall at any
place from behind the unit, but the wall has unusual
surface conditions, making it difficult for installing
the water heater. The power supply cable is coming
from elsewhere and has to be connected to the back
of the unit.
Extension kit VDX
(Art. no. 34120) – RDX is necessary!
The instant water heater can be installed by means
of this extension kit if the water pipes are coming
displaced or exchanged out of the wall or if they are
coming edgewise on the wall to the unit. The power
supply could come out of the wall at any place under
the unit or the wiring could be installed surface-
mounted.
Extension kit UDX
(Art. no. 34110) – RDX is necessary!
The instant water heater can be installed by means
of this extension kit if the water-connections are
expiring above the unit. The power supply could
come out of the wall at any place under the unit or
the wiring could be installed surface-mounted.
RDX
VDX
UDX
Installing the wall bracket
Thoroughly rinse the water supply pipes before installation to
remove soiling from the pipes.
1.
Using a 12 mm hexagon socket screw key, screw the screw-
in nipples into the wall connections. The seals must be fully
screwed into the thread. After tightening, the double nipples
must protrude by at least 12 mm.
2. Hold the included mounting template on the wall and align
it so that the holes in the template fit over the connections.
Mark the drill holes according to the template and drill them
using a 6mm drill. Insert the included dowels.
3. Screw in the wall bracket.Offset tiling or uneven surfaces
can be compensated by up to 30 mm with the aid of the
spacers supplied. The spacers are fitted between the wall
and the wall bracket.
Note
If you install this instantaneous water heater in exchange
for a conventional instantaneous water heater, there is
generally no need to drill holes for the wall bracket, in this
case step 2 would not be necessary.
Содержание German Pool DEX12
