clage German Pool DBN, Руководство пользователя

Страница: 7 / 21

3. Dimensions
100
170
468 363
56
96
239
Dimensions in mm
The following regulations must be observed:
• e.g. VDE 0100
• EN 806
• Installation must comply with all statutory regulations, as well as those of the local
electricity and water supply companies.
• The rating plate and technical specifications
• Only intact and appropriate tools must be used
4. Installation
16952
Installation Site
• Appliance must only be installed in frost-free rooms. Never expose appliance to
frost.
• The appliance must be wall mounted and has to be installed with water connectors
downward or alternative transversely with water connections left.
• The appliance complies with protection type IP25 and may therefore be installed in
protection zone 1 according to VDE 0100 part 701 (IEC 60364-7).
• In order to avoid thermal losses, the distance between the instantaneous water
heater and the tap connection should be as small as possible.
• The appliance must be accessible for maintenance work.
• Plastic pipes may only be used if they conform to DIN 16893, Series 2.
• The specific resistance of the water must be at least 1300 Ω cm at 15 °C. The
specific resistance can be asked for with your water distribution company.
Dimensions (in mm)
Based on Germany’s guidelines a general
test certificate concerning the evidence
of applicability of noise behaviour is
granted.
For installations under difficult conditions, these mounting accessories are available:
Mounting Frame Kit RDX 3
(Art. no. 36100)
The instant water heater can be installed by means of this mounting kit when the
power supply cable is coming out of the wall at any place from behind the unit, or the
wall has unusual surface conditions, making it difficult for installing the water heater.
When using the RDX the protection class changes from IP25 to IP24.
Mounting Accessories
4. Installation
RDX 3
VDX
UDX
Extension Kit VDX
(Art. no. 34120) – RDX is necessary! –
The instant water heater can be installed by means of this extension kit if the water
pipes are coming displaced or exchanged out of the wall or if they are coming edge-
wise on the wall to the unit. The power supply could come out of the wall at any place
under the unit or the wiring could be installed surface-mounted.
Extension Kit UDX
(Art. no. 34110) – RDX is necessary! –
The instant water heater can be installed by means of this extension kit if the
water-connections are expiring above the unit. The power supply could come out of
the wall at any place under the unit or the wiring could be installed surface-mounted.
12 13