X144 e-FlowMeter
Quick Start Installation & Removal Instructions
7
6
5
10
9
8
Step 5:
Insert straightened Swivel Insert/Measurement
Cylinder Assembly into valve, orient arrow on
wrench flat to point downstream
Step 6:
Loosen Thumb Set Screw. Remove Locking Collar
from tool. Remove tool and re-insert opposite end into
Swivel Assembly. Engage the tool and push firmly to orient
Measurement Cylinder 90˚ into flow path
Verify score mark is
flush with flat face
of straight thread
to ensure full
engagement
Step 7:
Remove tool from Threaded Swivel Insert
Step 8:
Insert tip of e-FlowMeter Sensor/Head Assembly
into Threaded Swivel Insert
Step 9:
Line-Up Centering Groove on straight threads
with Centering Pin; push to seat o-ring
Centering
Groove
Centering
Pin
Knurled
Lock
Step 10: HAND TIGHTEN
Knurled Lock onto straight
threads. Attach Sensing Cable to Sensing Probe
and Flow Display.
Proceed in accordance with Wiring Diagram
top view
inside view
flow
Step-By-Step X144D-AF e-FlowMeter Installation Instructions (continued)
Please see display
programming manual for
display configuration.
