X144D-AF e-FlowMeter
Quick Start Installation & Removal Instructions
X144D-AF e-FlowMeter Included Hardware
Sensing Probe
Parts List
1) Sensing Probe
2) Flow Display
3) Sensing Cable
1
1
Step-By-Step X144D-AF e-FlowMeter Installation Instructions
2
3
CLA-VAL
4
Isolation Valves
Step 2A:
Loosen Knurled Lock Nut on e-FlowMeter Assembly
Step 2B:
Pull apart. Straighten Measurement Cylinder by
hand. Set aside Sensor/Head in safe location,
protecting sensor tip
Sensor/Head Assembly
Threaded Swivel Insert
Step 3A:
Screw Locking Collar on straight threads. Insert
angled end of provided tool as shown, until it stops
Step 3B:
Tighten Thumb Set Screw
Measurement
Cylinder
Thumb Set Screw
Locking Collar
Step 4:
Apply Teflon® tape to NPT Threads
• Check threads on valve
• Use thread chasing tool (not supplied), if
necessary
flow
Step 1: Take necessary safety precautions
• Isolate the control valve using main line
isolation valves
• Bleed pressure from valve before removing
body plug
• Remove an inlet body plug
NOTE: If both inlet body tappings are used for
the pilot system, consult factory for correct
modification instructions.
sensor
tip
Thumb Set Screw
tape not supplied
Flow
Display
2
b)
Locking
Collar
Thumb Set
Screw
a)
Insertion Tool
Score
Marks
Complete
Installation Kit
4
Sensing
Cable
3
4) Installation Kit containing:
a) Insertion Tool
b) Locking Collar with
Thumb Set Screw
(a and b come assembled)
