SM-A14448-A/2
3. USAGE
14
2019-08-19
3.2 Using the Controller
• For how to use the controller and the setting tool (S-Tools), refer to the instruction manual for each
product.
• For the instruction manual number, refer to "1.2 Instruction Manuals Related to This Product".
3.3 Manual Operation
•
Make sure that the servo is turned off before performing manual operation.
A malfunction or damage may occur.
•
Do not apply excessive load to the manual operation plate.
An operation fault or damage may occur.
•
The manual operation is mainly intended for use in starting, maintenance, and inspection.
If used too often, an unexpected operation may result.
• Before using the manual operation plate, refer to the dimensions shown below to prepare the jig.
• Do not insert the jig into the ø4 hole by more than 5 mm.
• CW (clockwise): Turns table in the CCW direction.
• CCW (counterclockwise): Turns table in the CW direction.
Manual operation cover
Manual operation plate
Table turns in the CCW direction.
Table turns in the CW direction.
