CKD ECS2-G4-00-50G-49-L-T2YD-D-H, Инструкция по эксплуатации

Страница: 9 / 42

5
Switch specifications 1.2.2

Reed 2-wire (T switch)
Descriptions
Reed 2-wire
T0H/T0V T5H/T5V T8H/T8V
Applications
For programmable
controller, relay
For programmable controller,
relay, IC circuit
(without indicator),
serial connection
For programmable controller, relay
Load voltage 12/24 VDC 110 VAC 5/12/24 VDC 100/110 VAC 12/24 VDC 110 VAC 220 VAC
Load current 5 to 50 mA 7 to 20 mA 50 mA or less 20 mA or less 5 to 50 mA 7 to 20 mA 7 to 10 mA
Internal voltage drop 3 V or less 0.1 V or less
(Note 1)
3 V or less
Indicator lamp Red LED (Lit when ON) Without indicator lamp Red LED (Lit when ON)
Leakage current 0 mA
Lead wire length
1m
、
3m
、
5m
(Oil-resistant vinyl cabtyre cable 2-conductor, 0.3 mm
2
)
1m
、
3m
、
5m
(Oil-resistant vinyl cabtyre cable 2-conductor, 0.3 mm
2
)
Shock resistance 294 m/s
2
Insulation resistance 20
MΩ and over with 500 VDC megger
10
0 MΩ and over with 500 VDC megger
Withstand voltage
No failure after 1 minute of 1,000 VAC applications. No failure after 1 minute of 1,500 VAC applications.
Ambient temperature -10(14°F) to +60°C(140°F)
Degree of protection IEC standard IP 67, JIS C 0920 (water-tight), oil-resistant
Contact protection
circuit
(Note 2)
None Yes
Note1: Internal resistance
0.5Ω or less.
Note2: Refer to Intro Page 14 for contact protective measures.

Proximity 2-wire (T switch)
Descriptions
Proximity 2-wire
T1H/T1V T2H/T2V
T2JH/T2JV
(Off-delay)
T2YH/T2YV
(2-color display)
T2WH/T2WV
(2-color display)
Applications
For programmable controller,
relay solenoid valve
Dedicated for programmable controller
Output method 85 to 265 VAC 10 to 30 VDC
24 VDC ±10%
Power supply voltage 5 to 100 mA 5 to 20 mA
(Note 1)
Internal voltage drop
10% or less of load
voltage
4 V or less
Indicator lamp Red LED(Lit when ON) Red/green LED(Lit when ON)
Leakage current
1 mA or less with 100 VAC.
2 mA or less with 200 VAC.
1mAor less
Lead wire length
1m
、
3m
、
5m
(Oil-resistant vinyl cabtyre
cable 2-conductor, 0.3 mm
2
)
1m
、
3m
、
5m
(Oil-resistant vinyl
cabtyre cable
2-conductor, 0.2 mm
2
)
1m
、
3m
、
5m
(Oil-resistant vinyl cabtyre cable
2-conductor, 0.3 mm
2
)
1m
、
3m
、
5m
(Oil-resistant vinyl
cabtyre cable
2-conductor, 0.2 mm
2
)
Shock resistance 980 m/s
2
Insulation resistance
≧
100
MΩ at 500
VDC(megger)
20
MΩ and over
with 500
VDC(megger)
≧
100
MΩ at 500 VDC(megger)
20
MΩ and over
with 500
VDC(megger)
Withstand voltage
No failure after 1 minute of
1,500 VAC applications.
No failure after 1 minute of 1,000 VAC applications.
Ambient temperature -10(14°F) to +60°C(140°F)
Degree of protection IEC standard IP 67, JIS C 0920 (water-tight), oil-resistant
Note 1: The above maximum load current is 20 mA at 25°C. The current is lower than 20 Ma if the operating ambient temperature around the
switch is higher than 25°C (5 mA to 10 mA at 60°C).