Equipment automation can be easily achieved.
Because of the DD actuator, from design to operation it is simple and effortless.
Design
Purchasing
Assembly
Driving
Maintenance
Please try it!!
Inventory can be reduced with possible reuse.
The pilot and positioning pin hole are standard equipment.
Assembly and adjustment effort can be reduced.
For the Set Model No. (Motor+Cable) ordering is simple.
Drive system parts (pulley, belt, gear) purchasing is unnecessary.
Through the check sheet (Attached) models can be selected.
The number of design processes can be reduced because
there is a simple structure with no bulge in the gear portion.
Further added improvements have made operation setting
in personal computer tools easy.
It can move smoothly with positioning in the optimal
cam curve.
Use cases
With the feeling of “Just put it on the table” you can design equipment.
It is equipped with a wealth of features that are appropriate for an index table
such as split position output (stop position output) and I/O signal output during
indexing, and it is also possible to reduce the external sensor.
Point
of success
Semi-automation of
manual operation
θ-axis unit when making
a module of equipment
<Purpose>
• Productivity improvement
• Work stabilization
<Purpose>
• Reduction of equipment design time
• Equipment reuse
Addition as a sub-assembly
process to existing equipment
(Replacement of existing equipment components)
<Purpose>
• Tact improvement of the entire equipment
• Miniaturization of existing equipment
AX4000T
Series
AX2000T
Series
AX1000T
Series
Existing ABSODEX and program parameters (except for some) can be shared.
