The SHoW DMX OEM Receiver User’s Manual
Rev 1.1 10/14/08
18 of 27 Pages
Extension User Interface
The OEM unit can be provided with an optional User Interface PCBA (CTI # 5609) and
cable. This allows positioning of the interface on a different surface or at a different
angle than the OEM PCB assembly. In order to use this interface, you will need to have
an OEM unit that is provided with the optional extension interface connector, which
includes all models with part numbers ending in “R” or “D”.
To connect the 5609 Extension UI to the OEM Unit, simply connect the UI’s provided flat
cable to the mating connector on the OEM.
The Extension UI can be used with an OEM without a local interface (e.g. 5605LR) or
with an OEM Unit with a local interface (e.g. 5605LD). When using the 5609 Extension
UI with an OEM unit that is already provided with a local interface, both interfaces will
operate and the displays will mimic each other.
select hole size for 4-40 hardware.
Actual hole size shall be determined
by fastener type selected.
Figure 10, OEM User Interface Extension Dimensions
