The SHoW DMX OEM Receiver User’s Manual
Rev 1.1 10/14/08
17 of 27 Pages
27 11 WiFi
1-6
59 11
WiFi
7-11
28 12 WiFi
1-6
60 12
WiFi
7-11
29 13 WiFi
1-6
61 13
WiFi
7-11
30 14 WiFi
1-6
62 14
WiFi
7-11
31 15 WiFi
1-6
63 15
WiFi
7-11
32 16 WiFi
1-6
64 16
WiFi
7-11
Figure 9, SHoW ID Table
The ShoW DMX System supports 16 different Frequency Hopping Spread Spectrum
(FHSS) hopping patterns, full bandwidth broadcasting mode, and three different limited
bandwidth broadcasting modes. The SHoW IDs allow the user to quickly select the
desired combination of Hopping Pattern and Full or Limited Broadcast option that is
desired. Please see
The Advanced Wireless DMX Broadcast Features
of SHoW DMX
below for more about how these features can be used.
Power
The other user selectable option menu is Broadcast Power. Since the 5605/5606 OEM
Receiver is configurable as a half duplex RDM Responder it is capable of transmitting as
well as receiving when used in the RDM mode. Therefore, the OEM Receiver is
provided with adjustable output power. For the 5605 OEM Receiver (North American)
the available power settings are 5mW, 10mW, 50mW, 100mW, or 125mW FCC. For the
5606 OEM Receiver - CE, the power settings are 5mW, 10mW, 50mW or 100mW ETSI.
When you page to the Power menu, the LED display will read:
P xx
(xx= power setting).
When you enter the menu (left button) the display will change to
> xx
. Scroll through the
available choices and select the one you want (press and hold the left button).
Software
This menu accesses the current software version in the OEM Receiver and in its SHoW
DMX Radio. When you enter the menu (left button) the display will show the current
software versions. This menu is not editable.
Certification
This menu accesses the compliance certifications of the OEM Receiver and its SHoW
DMX Radio. When you enter the menu (left button) the display will show FCC, IC and
CE compliance information. This menu is not editable.
Advanced OEM applications
The SHoW DMX OEM Receivers can be utilized in a number of ways other than the
standard application.
Control and configuration via host user interface
The OEM Receiver can be controlled and configured directly from the host unit’s user
interface via RDM commands. Please contact City Theatrical, Inc. for details.
