CN-1108 Setup and Installation Manual
10
8. ICD COMMAND INDEX
ICD Console Command & Description
ICD COMMAND
COMMAND DESCRIPTION
R
Read All Am79C901s register (console)
RR##
Read All Port Reg.##
RP##
Read Port ## All Reg.
WP##R##Hxxxx
Write Port## Reg.## with hex xxxx
AO
Enable Auto Noise Level on all ports (Please refer to
Auto
Noise Level Functionality
section)
AF
Disable Auto Noise Level on all (Please refer to
Auto
Noise Level Functionality
section)
A
Display Auto Noise Level Status
VF VLAN
Off
VO VLAN
On
V
Display VLAN Status
P
Display Status of All Ports
PD##
Disable given port (only for HPAN Port)
PE##
Enable given port (only for HPNA Port)
C
Clear Packet Counters of All Port Counter or Given Port
PC##
Display Transmit/Receive/Collision Counters in Hex of
given port or all ports when port number is not enter
U Display
Unit
Information
S Save
Data
RS Reset
Unit
RSW
Restore MIB Agent Factory Defaults and Reset Switch
X
To Exit ICD Command Mode
Note
: For the VLAN and save commands, CN-1108 takes approximately 52 seconds to
check the integrity of all the registers.
Symbol Key:
## - HPNA Port number or Register number
rr - Am79c901s Register Number
xxxx - Hexadecimal Data
