Citronic MPCD-S6 Ultima, Руководство пользователя, Страница: 9 / 12

™
Operation
1. Eject Function
Press this button to eject the disc. The disc will not
eject unless the player is in cue or pause, this
prevent accidentally ejecting the disc when in play
mode.
2. CD Slot In
Insert your CD in the CD Slot In. Make sure that
you only hold the CD with 2 fingers on the edge.
Avoid touching the inside area of the CD.
3. Selecting Tracks
Select desired track by pressing the TRACK
SEARCH Buttons once to move to one higher or
lower track or hold the TRACK buttons down to
change tracks continuously at a higher speed.
When a new track is selected during playback,
playback begins as soon as the search operation is
completed.
4. Starting Playback
Press the PLAY/PAUSE button during the pause or
cue to start playback.
The PLAY indicator lights when playback starts.
5. Stopping Playback
There are two ways to stop playback.
1) Press the PLAY/PAUSE button during playback
to pause at that point
2) Press the CUE button during playback to return
to the position at which playback started (Back
Cue).
6. Pausing
Press the PLAY/PAUSE button to switch between
play and pause.
The PAUSE indicator lights when the pause mode
is set.
7. Cueing
"Cueing" is the action of preparing for playback;
when the Cue button is pressed, playback return to
the cue point and enters pause mode. When the
PLAY/PAUSE button is pressed during the cue
mode, playback starts.
Cue point setting:
A. Playback starts from pause (using the jog wheel
to set the start point) or skips to a new track during
play or pause.
The beginning play point will be set to the cue point.
Or
B. Press the IN button during playback to set the
new cue point (“CUE on the fly”).
To return to Cue point press Cue Button. This will
return to point A or B above.
The player has completed the cue or pause
operation and is waiting for the play start command.
When the PLAY/PAUSE button is pressed,
playback starts.
C. To memory cues.
8. Auto Cue
When disk is loaded, the cue point is set to the first
source of music.
If track is changed before pressing play, the cue
point is changed to the new starting point.
If you pause during playback this also sets the new
cue point.
9. Frame Search
This is done by first pausing then using the jog
wheel to set the starting point. (When you use the
jog wheel the monitor function allows you to hear
what is playing.) Once you reach your desired
starting point, you can set a cue (starting) point by
pressing PLAY/PAUSE button.
10. Scanning (fast forward/fast reverse)
To turn the search wheel forward or reverse will
give you a fast search through a disc or track. You
will scan forward or reverse at 4 different speeds
depending on how much you turn the wheel.
11. Loop Play
You can create a seamless loop between two
points continuously.
a- Press PLAY/PAUSE button so a CD is playing.
The PLAY/PAUSE button’s LED lights (figure 1).
b- Press IN button . This sets the starting point of the
SEAMLESS LOOP. The IN button LED will light
(figure 2).
fig.2
c- Press OUT button to set desired ending point of
the SEAMLESS LOOP. You will know you are in
SEAMLESS LOOP mode because IN and OUT
LED will light and flash. LOOP INDICATOR in
LCD DISPLAY will also flash. Sound will continue
with no interruption (SEAMLESS LOOP)(figure 3).
Fig.3
d- To exit SEAMLESS LOOP, press OUT button .
LED will stay on but not flash. Music will resume
normal play (figure 4).
fig.4