Citronic MPCD-S6 Ultima Скачать руководство пользователя страница 4

 

 

Setting up the MPCD-S6 Ultima

 

1.Checking the Contents 

Check that the carton contains the following items: 

1. Main unit 
2. Operating instructions 
3. Auto-start cable 
4. AC power cord 

2. Installing the Unit 

1. Place your unit on a flat surface. 
2. Be sure the player is mounted in a well-ventilated area where it will not be exposed to direct sunlight, high 

temperatures, or high humidity. 

3. Try to place the unit as far as possible from TVs and tuners, as the unit may cause undesirable interference. 

CAUTION: 

 

The player will work normally when the unit is mounted with the front panel at within 15 degrees of the 

vertical plane. If the unit is tilted excessively, discs may not be loaded or unloaded properly. 

 

The unit panel's LCD’s are designed to be clearly visible within the angles shown in Figure 1. Mount the unit 

panel so that the visual angle is within this range. 

 

 

 

3.Connections 

1  Turn off the POWER switch. 
2  Connect the RCA pin cord to the input on your mixer. 
 

CAUTION: 

  Be sure to use the supplied cables. Using other types of cable may result in unit damage. 

 

To avoid sever damage to the unit, be sure the power is off when connections to the unit.

 

 
Compact Discs 
1. Precautions on handling compact discs 

• 

Do not allow fingerprints, oil or dust to get 
on the surface of the disc. 

• 

If the disc is dirty, wipe it off with a soft dry 
cloth. 

• 

Do not use benzene, thinner, water, record 
spray, Electrostatic-proof chemicals, or 
silicone-treated cloths to clean discs. 

• 

Always handle discs carefully to prevent 
damaging the Surface; in particular when 
removing a disc from its Case or returning it. 

• 

Do not bend the disc. 

• 

Do not apply heat. 

• 

Do not enlarge the hole in the center of the 
disc. 

• 

Do not write on the label (printed side) with 
a hard tipped Implement such as a pencil or 
ballpoint pen. 

• 

Condensation will form if a disc is brought 
into a warm area from a colder one, such 
as outdoors in winter. Do not attempt to dry 
the disc with a hair dryer, etc. 

2. Precaution on storage 

• 

After playing a disc, always unload it from 
the player. 

• 

Always store the disc in the jewel case to 
protect from dirt or damage. 

• 

Do not place discs in the following areas: 
Areas exposed to directs sunlight for a 
considerable time. Areas subject to 
accumulation of dust or high humidity. 
Areas are affected by heat from indoor 
heaters, etc..

10

45

Sig ht poin t

Fig ure 1

 

Содержание MPCD-S6 Ultima













Отзывы: