CITROËN 2012 C-ELYSEE, Руководство пользователя

Страница: 142 / 236

140
Practical information
Changing a fuse
Good Failed
CITROËN will not accept responsibility
for the cost incurred in repairing your
vehicle or for rectifying malfunctions
resulting from the installation of
accessories not supplied and not
recommended by CITROËN and
not installed in accordance with its
instructions, in particular when the
combined consumption of all of the
additional equipment connected
exceeds 10 milliamperes.
Installing electrical
accessories
Your vehicle's electrical system is
designed to operate with standard or
optional equipment.
Before installing other electrical
equipment or accessories on your
vehicle, contact a CITROËN dealer or a
qualified workshop.
Before changing a fuse:
) the cause of the failure must be identified
and rectified,
) all electrical consumers must be switched
off,
) the vehicle must be immobilised with the
ignition off,
) identify the failed fuse using the tables and
layout drawings in the following pages.
To replace a fuse, you must:
) use the special tweezer to extract the fuse
from its housing and check the condition of
its filament.
) always replace the failed fuse with a fuse
of the same rating (same colour); using a
different rating could cause faults (risk of
fire).
Tweezer
The replacement of a fuse not shown in
the tables below may cause a serious
malfunction of your vehicle. Contact
a CITROËN dealer or a qualified
workshop.
If the fuse fails again soon after
replacement, have the vehicle's electrical
system checked by a CITROËN dealer
or a qualified workshop.