CITROEN C4 SpaceTourer, Руководство пользователя

Страница: 213 / 316

8
211
In the event of a breakdown
F
Check that the compressor switch is at the
" O " position.
F
Uncoil fully the electric cable, stowed under
the compressor.
Only the 12 V socket located at the front
of the vehicle can be used to power the
compressor.
F
Start the compressor by placing the switch
at position " I " and adjust the pressure to the
value shown on the vehicle's tyre pressure
label. To deflate: press the black button
located on the compressor pipe, near the
valve connection.
If a pressure of 2 bars is not reached after
7 minutes, this indicates that the tyre is
not repairable; contact a CITROËN dealer
or a qualified workshop for assistance.
F
Once the correct pressure is reached, put
the switch to the " O " position.
F
Remove the kit then stow it.
Do not drive more than 125 miles (200 km)
with the repaired tyre; see a CITROËN
dealer or a qualified workshop to change
the tyre.
Should the pressure of one or more tyres
be adjusted, it is necessary to reinitialise
the under-inflation detection system.
For more information on
Tyre under-
inflation detection , refer to the
corresponding section.
F
Uncoil the pipe stowed under the
compressor.
F
Screw the pipe onto the valve and tighten
firmly.
F
Connect the compressor's electric plug to
the vehicle's 12 V socket.
F
Switch on the ignition.
The tyre inflation pressures are given on
this label.
Spare wheel
Scan the QR code on page 3 to view
explanatory videos.
Access to tooling
Procedure for changing a wheel with
a damaged or punctured tyre for the spare
wheel using the tools provided with the vehicle.
The tools are installed in the boot under the
floor.
Remove the boot carpet to access them.