background image

5. If a remote or automatic generator start system is used, disable the 

automatic starting circuit or disconnect the generator to prevent accident 

during servicing. 

 
Introduction 

CiTO Power Inverters CPI-500 / 1000 is a DC-to-AC inverter with auto 

line-to-battery transfer and integrated charging system, serving as an 

extended run UPS, a standalone power source or an automotive inverter.     

 

CPI-500 / 1000 supplies power from AC power and DC source.    When AC 

cable is connected to a wall socket, utility power goes to connected 

equipment(s) and/or charges the battery set via charging system. In UPS 

mode, Inverter automatically converts battery energy into AC power for 

backing up the connected devices. 

 

 

Features: 

z

  Automatic line-to-battery switchover 

z

  Selectable Input voltage ranges 

z

  High efficient DC-to-AC conversion, minimizing energy loss 

z

  Rack Tower design for flexible placement 

z

 Built-in enhanced charger 

z

 Intelligent 2-stage charger control for efficient charging and preventing 

overcharge 

z

  Provides overload protection 

z

  Auto restart while AC recovery 

z

  Multi-function LED indications and buzzer alarms 

Содержание CPI-1000 Series











Отзывы: