General Precautions
1. Before using CPI-500 / CPI-1000, read all instructions and cautionary
markings on : (1)CPI-500M / 1000M (2) The batteries (3) This manual
2.
CAUTION
--To reduce risk of injury, charge only lead-acid type
rechargeable batteries. Other types of batteries may cause damage and
injury.
3. Do not expose Inverter to rain, snow or liquids of any type. Inverter is
designed for indoor.
4. Do not disassemble the Inverter. Take it to a qualified service center when
service or repair is required.
5.
WARNING:
Provide ventilation to outdoors from the battery compartment.
The battery enclosure should be designed to prevent accumulation and
concentration of hydrogen gas at the top of the compartment.
6.
NEVER
charge a frozen battery.
7. Input/output AC wiring must be no less than 18 AWG gauge copper wire
and rated for 75
o
C or higher. Battery cables must be rated for 75
o
C or
higher and should be no less than 10AWG gauge. The inner diameter of
the copper ring terminal which is used to connect battery cables to
Inverter DC terminals should be no less than 6mm.
8. Be extra cautious when working with metal tools around batteries.
Short-circuiting the batteries could cause an explosion.
9. For battery installation and maintenance: read the battery manufacturer’s
installation and maintenance instructions prior to operating.
10. CiTO Power Inverters can be used with fan, bulb, TV, heater, iron, etc.
Consult local technicians for more advices.
Personnel Precautions
1. Have plenty of fresh water and soap nearby in case battery acid contacts
skin, clothing, or eyes.
2. Avoid touching eyes while working near batteries.
3. NEVER smoke or allow a spark or flame in vicinity of a battery.
4. Remove personal metal items such as rings, bracelets, necklaces, and
watches when working with batteries. Batteries can produce a short-circuit
current high enough to make metal melt, and could cause severe burns.
