CITIZEN QUARTZ
YACHTING
Model No. JH2XXX
Cal. No. C21
❈
• INSTRUCTION MANUAL
CTZ-B6782
Operating method is the same to Cal. No. C210,
C211 and C212.
1. FEATURES
The YACHTING is Citizen’s new Promaster sports
watch specially designed for yacht racing. It is a
combination quartz watch with analog and digital
displays and offers the RACE TIMER, CHRONOGRAPH
(stopwatch) and other versatile functions.
2. PARTS DESCRIPTIONS
3. TO CHANGE THE MODE
This watch has 5 modes: TIME/CALENDAR,
ALARM, CHRONOGRAPH, TIMER and RACE
TIMER. The mode changes every time the
嘷
M
button
is pressed in the following order.
• Above figures show the normal display of each mode.
• The watch automatically returns to the
TIME/CALENDAR mode from the ALARM mode in
about 2 minutes if the watch is left in the normal
ALARM display.
4. TO SET THE ANALOG DISPLAY
1. To set the correct time, pull out the crown and turn
it in either direction.
2. After adjusting the analog display, push the crown
to the normal position. The watch will restart.
• To precisely synchronise the watch, stop the Second
Hand at ”0” and advance the Minute Hand several
minutes and then move it back in the reverse
direction. Push back the crown simultaneously with
the time-casting tone.
• You can set different times in the Analog display
and Digital display for use as a dual-time watch.
5. TO USE THE DIGITAL FUNCTIONS
1. To Set The Time/Calendar
Mode mark:
[TME]
• Press the
嘷
M
button to set the watch to the
TIME/CALENDAR mode.
• To change the TIME display to the CALENDAR
display and vice versa, press the
嘷
A
button in the
normal TIME/CALENDAR mode.
• To adjust Seconds, depress the
嘷
B
button in the
normal TIME/CALENDAR mode. Seconds will flash.
Adjust the seconds to “0” by pressing the
嘷
A
button.
• To adjust other TIME displays, select the digit by
pressing the
嘷
B
button, and adjust them by pressing
the
嘷
A
button. The display for adjustment will flash
in the order of Minutes, Hours, Month, Date, Year
and 12 (24H) each time the
嘷
B
button is pressed.
• The display changes 12-hour and 24-hour displays
each time the
嘷
M
button is pressed in the 12H/24H
setting mode. This setting automatically changes
the 12-hour and 24-hour display in the ALARM mode.
• Rapid advancement of the digits: Press and hold the
嘷
A
button when adjusting the display. The flashing
digits will advance rapidly.
• Auto-Return function: The watch will automatically
return to the normal TIME display when left for about
2 minutes, with the digits flashing in the adjustment
mode.
• CALENDAR programming: The CALENDAR is
programmed from 1993 through 2099 including
leap years. Once Month, Date and Year are set, the
display changes automatically up to the end of 2099.
