Citizen JCTV3241XB Скачать руководство пользователя страница 6

Страница: 6 / 24

Converter/ Descrambler

A / B Switch

Splitter

This television has an extended
tuning range and can tune most
cable channels without using a
cable company supplied
converter box. Some cable
companies offer "premium pay
channels" in which the signal is
scrambled. Descrambling these
signals for normal viewing
requires the use of a descrambler
device which is generally
provided by the cable company.

ANTENNA/CATV CONNECTIONS

Separate VHF/UHF Antennas

Connect the 75 ohm Cable from the VHF antenna and the UHF
antenna Twin-lead to a combiner (not supplied). Attach the Combiner
to the Antenna Jack.

NOTE:

If your VHF antenna has a Twin-lead Wire, use the 300-75

ohm Matching Transformer (not supplied), then connect the
Transformer to the Combiner.

For Subscribers to Basic Cable TV Service

For basic cable service not requiring a Converter/Descrambler box,
connect the CATV 75 ohm Coaxial Cable directly to the Antenna
Jack on the back of the television.

For Subscribers to Scrambled Cable TV Service

If you subscribe to a cable service which requires the use of a
Converter/Descrambler box, connect the incoming cable to the
Converter/Descrambler box and connect the output of the box to the
Antenna Jack on the back of the television. Follow the connections
shown left. Set the television to the output of the Converter/
Descrambler box (usually channel 3 or 4) and use the Converter/
Descrambler box to select channels.

For Subscribers to Unscrambled Basic Cable with Scrambled
Premium Channels

If you subscribe to a cable service in which basic cable channels
are unscrambled and premium channels require the use of a
Converter/Descrambler box, you may wish to use a two-set signal
splitter (sometimes called a "two-set coupler") and an A/B Switch
box from the cable installer or an electronics supply store. Follow
the connections shown left. With the switch in the "B" position, you
can directly tune any nonscrambled channels on your TV. With the
switch in the "A" position, tune your TV to the output of the Converter/
Descrambler box (usually channel 3 or 4) and use the box to tune
scrambled channels.

300-75 ohm
Matching Transformer
(not supplied)

Combiner

(not supplied)

300-75 ohm
Matching Transformer
(not supplied)

VHF Antenna

Incoming CATV

Single 75 ohm Cable

Combination VHF/UHF Antenna

300 ohm Twin-lead Wire

Splitter

Take off the Splitter

Single 75 ohm Cable

300 ohm Twin-lead Wire

UHF Antenna

Combination VHF/UHF Antenna (Single 75 ohm Cable or 300
ohm Twin-lead Wire)

Connect the 75 ohm cable from a combination VHF/UHF antenna to
the Antenna Jack. If your combination antenna has a 300 ohm Twin-
lead Wire, use the 300-75 ohm Matching Transformer (not supplied).

Combination VHF/UHF Antenna (Separate VHF and UHF 300
ohm Twin-leads)

Connect the UHF Twin-lead Wire to a Combiner (not supplied).
Connect the VHF Twin-lead to the 300-75 ohm Matching
Transformer (not supplied). Attach the Transformer to the Combiner.
Attach the Combiner to the Antenna Jack.

AUDIO/VIDEO JACK CONNECTIONS

The exact arrangement you use to interconnect various video and audio components to the TV is dependent on the model and features
of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs.

The connection diagrams below are offered as suggestions. You may need to modify them to accommodate your particular assortment
of components. The diagrams are intended to show component video and audio interconnections only.

Press the TV/AV selector button to select the AV mode to use the TV as a monitor.

3. To connect the TV to the Camcorder

Set the TV/AV SELECTION for this connection, to AUX2.

To playback from the camcorder, connect the camcorder to the
TV as shown.

2. To connect the TV to a Video Game System

Set the TV/AV SELECTION for this connection, to AUX2.

The TV can also be used as a display device for many video
game systems. However, due to the wide variety of different
types of signal generated by these devices and subsequent
hook-up variations required, they have not all been included
in the suggested connection diagrams. You'll need to consult
each component's Owner's Manual for additional information.

1. To connect the TV to a VCR

Set the TV/AV SELECTION for this connection, to AUX1.

TV/AV SELECTION

If you connect the TV to a VCR, camcorder, Video game System
or other A/V component, through the audio/video in jacks, use
the TV/AV button to make your selection.

Press the TV/AV button repeatedly to select the desired mode.
"AUX1" or "AUX2" will display on the screen for 4 seconds.

AUX 1

AUX 1

AUX 2

(not supplied)

Rear of TV

VCR

To Audio/Video

OUT

VIDEO

AUDIO (L)

AUDIO (R)