Citizen JCTV3241XB, Инструкция по эксплуатации

Страница: 11 / 24

11
ENGLISH
Before requesting service, please refer to the following chart for the symptom and possible solution.
SYMPTOMS POSSIBLE SOLUTIONS
• Make sure the power cord is plugged in.
• Try another AC outlet.
• Power is off, check fuse or circuit breaker.
• Unplug unit for an hour, then plug it back in.
• Station or CATV experiencing problems,
tune to another station.
• Check VOLUME and MUTE.
• Check for sources of possible interference.
• Station or CATV experiencing problems,
tune to another station.
• Make sure channels are set into memory.
• Check antenna or CATV connections, adjust
antenna.
• Check for sources of possible interference.
• Check picture control adjustments.
• Station or CATV experiencing problems,
tune to another station.
• Make sure channels are set into memory.
• Station is weak, adjust antenna to receive
desired station.
• Check for sources of possible interference.
• Station or CATV experiencing problems,
tune to another station.
• Make sure channels are set into memory.
• Check picture control adjustments.
• Check antenna or CATV connections, adjust
antenna.
• Check for sources of possible interference.
• Station or CATV experiencing problems,
tune to another station.
• Make sure channels are set into memory.
• CATV company is scrambling signal.
• Adjust antenna.
• Check all CATV connections.
• Set TV/CATV menu option to the CATV mode.
• Station or CATV system problems, try
another station.
• Check antenna connections, adjust or
re-direct antenna.
• Check for sources of possible interference.
Poor sound
or No sound.
Poor picture
or No picture.
Horizontal or
diagonal bars
on screen.
No Remote
operation.
• Select proper language in the menu options.
Display is not
shown in your
language.
No reception
above
channel 13.
No CATV
reception.
• Batteries are weak, dead or inserted
incorrectly.
• Remote is out of range, move closer to TV
(within 15 feet).
• Make sure Remote is aimed at sensor.
• Confirm there are no obstructions between the
Remote and the TV.
• Make sure the power cord is plugged in.
• Make sure TV/CATV menu option is in the
appropriate mode.
• If using antenna, check UHF antenna
connections.
• No broadcast on station tuned.
• Sleep Timer is set.
• Power interrupted.
TV shuts off.
• TV station experiencing problems or program
tuned is not closed captioned. Try another
channel.
• Check CATV connection or VHF/UHF
antenna, reposition or rotate antenna.
• Press TV/CAP/TEXT button to turn on the
closed caption decoder.
Closed
Caption is
not activated.
SYMPTOMS POSSIBLE SOLUTIONS
SPECIFICATIONS
TV does not
operate.
Picture
wobbles or
drifts.
Poor colour
or no colour.
Poor recep-
tion on some
channels.
AC Power Input:
AC Power Consumption:
Chassis Construction:
Picture Tube:
Audio Power Output Rating:
Speaker:
Tuner Type:
Remote Control:
Receiving Channels:
Input:
Dimensions:
Weight:
120V, 60Hz
100 Watts
IC Solid state
20 inches (measured diagonally)
2.5 + 2.5 Watts
51mm x 119mm (2 x 4-11/16 inches) Full Range, 8 ohm x 2
181 Channel, Quartz PLL Frequency Synthesized
Infrared, Direct Access, 2 x AAA batteries (not supplied)
VHF
2-13
UHF 14-69
CATV 01-97 (5A)-(A-3)
98-99 (A-2)-(A-1)
14-22 (A)-(I)
23-36 (J)-(W)
37-65 (AA)-(FFF)
66-125 (GGG)-(125)
S-Video Y: 1.0 Vp-p/75 ohms
C: 0.3 Vp-p/75 ohms
Video: (RCA) 1.0 Vp-p/75 ohm
Audio: (RCA) –8 dBm/50K ohm
Antenna: VHF/UHF IN 75 ohm coaxial
590mm (W) x 483mm (D) x 444mm (H) [23-1/4 (W) x 19 (D) x 17-1/2 (H) inches]
22.0 kg (48.5 Ibs)
TROUBLESHOOTING GUIDE
Remote Control
Instruction Manual
ACCESSORIES
Design and specifications are subject to change without notice.
3U102211A-E 2/4/05, 4:54 PM 11