1
INTRODUCTION
1.3/1.3.1/1.3.2
9
JCTV2110
1.3 REMOTE CONTROL OPERATION
1.3.1 INSTALLING BATTERIES
NOTES:
The lifetime of the batteries may last up
to one year, depending on how often the
remote control is used. For the best
performance, the batteries should be
replaced on a yearly basis, or when
remote operation becomes erratic.
Be sure to place the batteries in the
correct direction as shown left.
Do not mix old and new batteries, or
different types.
Old batteries may leak and damage the
r e m o t e c o n t r o l . A l w a y s r e m o v e
batteries as soon as they become weak.
1.3.2 EFFECTIVELY USING THE
REMOTE CONTROL
Point the remote toward the infra-red
remote sensor on the main unit as shown
above.
NOTES:
If direct sunlight, incandescent light, or
any other strong light sources hit the
remote control, the remote control may
not operate properly.
If there is an obstacle between the main
unit and the remote control, the remote
control signal may not be received.
1. Open the battery compartment cover.
2. Install two
size AA
batteries
in correct
direction.
3. Close the battery cover.
SENSOR
