— 14 —
●
Interface
Attached power cord and wiring cable are connected.
●
FG terminal
The printer frame is connected to ground. Be sure to keep this wiring.
●
Mounting attachment
A metal attachment for mounting the printer in a rack or the like.
●
Power connector board
Used for connecting the AC adapter.
2.2 Front Cover Inside
See 5.4 Specifications of Power Supply and Interface Connectors
●
Paper holder
A place where thermal paper roll is set.
●
Paper adjust guide
Adjusts this guide to meet the paper width to be set.
●
Paper guide
Thermal paper roll is set and held.
●
Auto cutter fixed blade
Used for cutting paper.
●
DIP switch
Allows various kinds of setting.
●
Thermal head
Prints characters and/or graphic data on thermal paper.
●
Platen
Feeds paper while pressing the thermal paper onto thermal head.
●
Auto cutter (CT-P292/CT-P293)
Cuts the paper with a command at the end of printing. Cutting method is
selectable between partial cut and full cut with a command.
Paper holder
Paper guide
Auto cutter
(CT-P291/CT-P293)
Platen
Thermal head
DIP switch
Auto cutter fixed blade
See 3.4 Setting Paper
See 3.6 Setting DIP Switch
Paper adjust guide