Citizen CSRA-09 Скачать руководство пользователя страница 15

14

Part 

Installation Instruction

1. Select the Location for Installation

1-1 Indoor Unit

Preface

1-2 Outdoor Unit

To guarantee the unit working normally,please read the manual carefully before installation,
and try to install it strictly according to this manual.
Earth the air conditioner properly.
Check the connecting cables and pipes carefully,make sure they are correct and firm before
connecting the power of the air conditioner.
The maximum length of the connecting pipe between the indoor unit and outdoor unit should
be less than 5 metres. It will affect the efficiency of the air conditioner if the distance longer
than that length.
After installtaion,the consumer must operate the air conditioner correctly according to this
manual, keep a suitable storage for maintenance and move of the air conditioner in the future.

On a rigid wall without vibration.
No obstacle in front of air inlet and outlet vents,the distance between the upper of the unit and
the ceiling should no less than 10cm.
The place where the cold air can be sent to the whole room.
The maximum distance between the indoor unit and outdoor unit is 5 metres, so does the
height difference between them.
Avoid direct sunlight.
Exhaust water can be easily drained.
The air filter can be installed or removed easily (There should be more than 20 cm space down
from the bottom of the unit to the ground).
The distance between the unit and TV or radio should be more than 1 metre (because the unit
can disturb the images of television and make noise).
The place should more than 1 metre away from the fluorescent lamp or other electric bulbs.
(For they may affect the remote controller working normally).

It should be installed at the place that keeping away from strong wind.
It should be installed at the place where there is good ventilation and low dust.
It should be placed to avoid direct sunlight and rain.
It should be installed at the area where the operating noise will not affect other pelple’s work
and rest.
It should be placed on a rigid frame to aviod vibration or noise.
Keep away from the flammble gases.
When the unit is installed in a high place, make sure to fix the feet of the unit.

Attention:

Do not install the air conditioner in the following
places, or it will cause a breakdown.

The places where the machine oils are highly used.
The places with high salt such as coastal areas.
Hotspring areas.
The places full of sulphur gases.
Other places of special atmosphere environment.

Содержание CSRA-09
























Отзывы: