Chapter 2 Installation Procedure
CLP-521, CLP-621 & CLP-631
2-4
4. Remove the one screw (PH, M3x3) that fastens the Motor Cover, and detach the Motor
Cover.
In this case, pay attention not to drop the screw inside the printer.
Note:
Do not touch the motor as it can get hot.
5. Remove the one screw (PHT(BH2T), M3x14) that fastens the Connector Cover, and detach
the Connector Cover.
6. Connect the cable of Cutter Stand Unit to the connector (CN15) on the Main PCB Unit of
the printer.
In CLP-621 and CLP-631, the
screw is fastened in the
horizontal direction.
