Citizen CHU304, Инструкция по эксплуатации, Страница: 11 / 20

- Eng 10 -
Ǒ¡Û‘ȣ
Py
ɫɫɤɢɣ
Français
Español
English
4
Pull the end of the cuff outwards so
that the cuff is snug around your arm
and then secure the end to the hook-
and-loop fastener.
5
Place your arm on a table or the like,
so that the center of the cuff comes to
the height of your heart.
* Carefully place the cuff on your
arm, taking care to use the correct
tightness. The tightness is correct
if you can readily slide a finger
between the cuff and your arm.
6
Relax your arm and lightly open your hand, with the palm upward.
3
Place the cuff at the height of the heart.
4
Press the “ START/STOP” switch.
* If the previous user had a high pressure setting, that high pressure will
automatically be used for the current measurement.
* If the pressurization value exceeds 260 mmHg, if pressurization feels
abnormal, or if you want to stop the measurement process, press the
“ START/STOP” switch again. The cuff deflates, and the power turns off.
• A beep is heard and all digits displayed is an initial display, indicating that the
monitor is functioning normal.
• The cuff is pressurized automatically.
* If the unit judges that pressurization is insufficient, it automatically repressurizes.
* The unit automatically sets the pressure based on the previous measurement.
* is displayed when a pulse is detected.
* When you want to stop measurement, press the “ START/STOP” switch.
The cuff is deflated and measurement stops.
00̲CHU304̲All.indb Eng-10 2015/06/02 11:00:51