5
6. SETTING DIGITAL TIME
When the time is set for any of the 30 cities or UTC, the times of other cities are automatically cor-
rected by converting the time difference.
[Normal Time Display]
(1) Press button
M
to switch the watch to the time mode.
(2) Press button
B
to display the city for which the time is to be corrected.
(3) Pressing button
B
continuously for about 2 seconds causes "SUM (abbreviation for daylight
savings time)" and "On or OF" to flash.
(4) Press button (A) to switch the selection for daylight savings time to "On" or "OF (OFF)" for that
city.
(5) Each time button
B
is pressed, the location that flashes changes in the order of seconds to
minutes to hours and finally to 12/24 hour display. Press button
B
until the location desired
to be corrected flashes.
(6) Press button
A
to correct the location that is flashing.
* When button
A
is pressed in the seconds correction state, the seconds is corrected to 00.
(The minutes advance by one minute when the seconds are between 30 and 59 seconds.)
* When switching between 12 and 24-hour display, the display switches between 12 and 24
hours each time button
A
is pressed.
* Each time button
A
is pressed in the hours or minutes correction state, the display
advances by 1. Pressing button
A
continuously causes the display to advance rapidly.
(7) Press button
M
to return to the normal display.
* When using the 12-hour display, pay attention to AM(A) and PM(P) when setting the
time.
* When none of the buttons are operated for about 2 minutes in the time correction
state (flashing display), the watch automatically returns to the normal time display.
* Pressing button
M
in the time correction state immediately returns the watch to the
normal time display.
Time
City name
