7
6.
Service and Maintenance
Care of your HazeMax
TM
will give you years of service. Note: cleaning
your unit is going to pay off in constant good performance.
1.
Dry all areas on the exterior of the machine once it is cool. Clean with a soft cloth to
remove any haze fluid from inside the fluid compartment or outside area.
2.
Do not store with haze fluid inside. When finished with the machine, clean the tube and
pump by operating the unit while running a pint of 5% vinegar/distilled water mix through
the pump and then rinse with a pint of distilled water. When finished, water should
remain in the line for storage. Do not drain or empty the tube of water unless a freezing
condition exists. Do not run the pump without fluid passing through the tube. This can
cause damage to the pump and is not covered under warranty.
3.
Do not transport or ship with haze fluid inside the machine.
7.
Technical Data
HazeMax
TM
Technical Data P/N 100020 (230V P/N 100025)
Type of Haze
Even, dry haze
Size:
22" x 9" x 11" (56cm x 23cm x 28cm)
Weight:
26 lbs (12 kg)
Shipping Size:
26 x 13 x 16 (66cm x 33cm x 41cm)
Shipping Weight
33 lbs (15 kg)
DMX
Built in 1-channel DMX
Fluid Type:
Water Vapor Haze™
Fluid Consumption:
@ 50 - 100% output 30 - 51 oz
(1 – 1.5 liters) per hour
Warm Up Time
6-10 minutes
Heating unit
1500 watts
Remote Timer
Included:
0-100% output control for continuous
haze
0-100% haze output control when using
cycle-timer
100% output using manual momentary
“BLAST” button
Cycle-timer = 1-11 seconds. "on",
0.2 - 5 minutes. "off"
Electrical
Requirements:
120VAC, 15A or 230VAC, 8A
Breaker
120VAC: 15A ; 230VAC: 7A
Limited Warranty
One year
Rev: 03/19/2018
