4
3. Description of the AQUAMAX™ MP
The AQUAMAX™ MP w/DMX is CITC’s newest professional hazing system. No other
comparable machine delivers a more even output of long-lasting, water-based organic
haze. The AQUAMAX™ MP can produce longer than the stiffest competition. Available
in either 120vac or 230vac, the AQUAMAX™ MP uses a quiet, reliable pump with a 1200
watt heating head, 2-channel DMX on board, remote control cycle-timer and hanging
bracket. AQUAMAX™ MP uses CITC Organic Haze™ fluid. The extra dry water-based
haze leaves no mess and no residue.
4.
Safety Instructions
WARNING: Read and understand all labels and operating
instructions before attempting installation.
o
Never open the machine without disconnecting power lead first.
o
Be sure you are using the correct voltage for your unit. The AquaMax MP is available as
120vac OR 230vac; they are not interchangeable.
o
Risk of electrical shock-
This device is supplied with a grounding conductor. To reduce
risk of electrical shock, connect only to properly grounded, grounding type receptacles.
Never remove the third prong from the plug.
o
Be sure area around hazer is dry before applying electrical power.
o
The AquaMax™ MP should only be used in a level position.
o
Make sure that your unit is pointed in a direction that leaves a 10ft (3m) open area out in
front. Place the front of the machine away from direct contact with electrical instruments
and people. Close output is warm and damp.
o
Fluid is very slippery when spilled. Care in keeping any drips or spills cleaned up is
necessary.
5. Operating the AQUAMAX™ MP
5.1
Selecting the Location
Secure a good location for the machine to rest solidly on the floor or suspended, so that
the unit is level with the ground and the output of the machine will not be restricted. Make
sure that your unit has enough room for adequate ventilation as well as sufficient open
space in front of it to allow the haze to expand, separate and enlarge.
5.2
Electrical Power Requirements
This machine requires a well-grounded 120 VAC (or 230VAC) circuit for operation. The
AQUAMAX™ MP draws approximately 10 amps at 120 VAC. (The 230VAC model draws
approximately 5 amps. Be sure the unit you have is suitable for your voltage) .During
AQUAMAX™ MP operation this circuit should be dedicated to the AQUAMAX™ MP. Do
