45
TS9000/TS9050 TouchStar Systems User Manual
TABLE 13 - COUNTER MODES
Mode
Function
0
Interrupt on terminal count
1
Hardware-retriggerable one-shot
2
Rate generator
3
Squarewave generator
4
Software-triggered strobe
5
Hardware-retriggerable strobe
PCMCIA Slots
The following is the typical PCMCIA section of config.sys
supporting ATA drivers:
DEVICE HIGH = C:\CARDSOFT\SS365SL.EXE
DEVICE HIGH = C:\CARDSOFT\SC.EXE
DEVICE HIGH = C:\CARDSOFT\ATADRV.EXE /S:2
DEVICE HIGH = C:\CARDSOFT\MTSRAM.EXE
DEVICE HIGH = C:\CARDSOFT\MTDDRV.EXE
DEVICE HIGH = C:\CARDSOFT\CARD ID.EXE
Save the changes, return to the Program Manager, and reboot
the system. The PCMCIA driver will not be deleted if the system
is not rebooted.
To disable a pre-loaded PCMCIA drivers, modify the config.sys
file by typing “rem” (remark) in front of every device showing
PCMCIA. This instructs the operating system to ignore those
lines. Save the changes, return to the Program Manager, and
reboot the system. The PCMCIA drivers will not be disabled if
the system is not rebooted.
Audible Indicator
The TouchStar is equipped with an audible indicator capable of
producing tones at output levels of 95dBA at one foot. This can
be used to alert the system operator to error conditions,
acknowledge data entry or to provide other (audible) feedback.
It is controlled at I/O 300, Bit 1.
SYSTEM REFERENCE - B
