23
TS9000/TS9050 TouchStar Systems User Manual
RF Connection
TouchStar systems configured with the 2.4 GHz spread-spec-
trum transceiver for wireless operation can be supplied with
patch or “rubber duck” type antennas. Antenna connections
may be made to connectors mounted on the top or bottom of the
case or internally, depending on the specific system configura-
tion. All antenna connections use non-standard connectors to
prevent antenna substitution and subsequent violation of FCC
regulations.
Figure 17. RF Connection
Maintenance
The TouchStar computer is designed to operate normally in
industrial environments which may contain high levels of
airborne contaminants including dirt and smoke. Periodic
cleaning of the TouchStar is recommended to remove build-up
of foreign substances on the case and touchscreen. Before
cleaning the TouchStar, remove power from the unit. Wipe
accumulated dirt and dust from the aluminum case with a
slightly dampened cloth, paying particular attention to the
angled edge of the bezel. Clean the touchscreen with a commer-
cial brand of computer screen cleaner and a soft, damp cloth, or
compressed air.
INSTALLATION & MAINTENANCE - 2
