Cistermiser EasyflushEVO, Руководство пользователя

Страница: 16 / 24

16 | cistermiser.co.uk Have a question? Call our customer support team on 0118 969 1611
12. Infrared Configuration Unit (ICU) guide
Entering configuration mode
Point the ICU towards the Easyflush
EVO
sensor
and press the configuration button, LEDs will
flash amber . Activation is most effective when the
configuration button is held down as the ICU is
brought close to the sensor.
It can take up to 3 seconds for the product to
sense the ICU. The
Easyflush
EVO will return to
normal operation if there are no button presses
for 30 seconds.
Configuring sensor range
Point the ICU at the Easyflush
EVO
sensor and
press the 1 sensor range button (the sensor
blinks green ).
Decrease or increase the sensor range by
pressing the and buttons respectively.
The sensor blinks red when the min or max
value is reached.
Press the button to check the sensor range
setting - the sensor displays the current setting by
flashing
green ; see table.
Save setting and exit ICU configuration mode by
pressing
the button.
Exit without saving by pressing the button.
5
Button descriptions
1
4
2
3
7
6
NOTE:
Not supplied but available from Cistermiser or any major plumbing merchant.
9
For Wave version
5 4 3 2 1 Number of flashes
Range (cm approx)
For Walkaway version
5 4 3 2 1 Number of flashes
65 60 55 50 45 Range (cm approx)
Activates cleaning mode
Activates ICU configuration mode
Decreases setting
Increases setting
Checks the setting being altered
Saves changes and exits ICU configuration mode
Quits ICU configuration mode without saving changes
Configures sensor range
Configures full/part flush time
Configures cistern refill time
Toggles Wave function ON/OFF (Walkaway ONLY)
12-hour hygiene cycle activation
Dual flush activation
Autorange setting of sensor range
Switch Wave & Walkaway variants & resets to default factory settings
5 10 15 20 25
8
No function