16
4
End of a program
At the end of a program, while the door is being released, the left display shows
End;
and the Start-LED is switched off.
After that only the right display will continue to show the program number. This
is the end of the program.
Premature ending of the program
By pressing the START-button (S) during the program, the Start-LED is
switched off and the water is drained from the machine. As long as the water has
not reached the safety level, the door will remain sealed and the display will show
“
SLE
” (Safety Level) on the
left display
. Afterwards the display will temporarily
show “
End
” on the same display
and the Start-LED will be switched off
. After
that only the right display will continue to show the program number. This is the
end of the program.
Remark:
If any attempt is made to interrupt the program prematurely
during a spin
phase
of the program, all functions on the display will be temperary
replaced by blinking
horizontal dashes
. After that only the right display
will continue to show the program number and the door will be released.
This is the end of the program.
Содержание IPSO HF304
Страница 1: ......
