Cisco WRT54G2 Linksys, Руководство пользователя

Страница: 9 / 368

Chapter 3
Advanced Configuration
5
Wireless-G Broadband Router
Static IP
If you are required to use a permanent IP address to
connect to the Internet, select
Static IP
.
Internet Connection Type > Static IP
Internet IP Address
This is the Router’s IP address, when
seen from the Internet. Your ISP will provide you with the
IP Address you need to specify here.
Subnet Mask
This is the Router’s Subnet Mask, as seen
by users on the Internet (including your ISP). Your ISP will
provide you with the Subnet Mask.
Gateway
Your ISP will provide you with the Gateway
Address, which is the ISP server’s IP address.
DNS Your ISP will provide you with at least one DNS
(Domain Name System) Server IP Address.
PPPoE
Some DSL-based ISPs use PPPoE (Point-to-Point Protocol
over Ethernet) to establish Internet connections. If you are
connected to the Internet through a DSL line, check with
your ISP to see if they use PPPoE. If they do, you will have
to enable
PPPoE
.
Internet Connection Type > PPPoE
User Name and Password
Enter the User Name and
Password provided by your ISP.
Connect on Demand: Max Idle Time
You can configure
the Router to cut the Internet connection after it has been
inactive for a specified period of time (Max Idle Time). If
your Internet connection has been terminated due to
inactivity, Connect on Demand enables the Router to
automatically re-establish your connection as soon as you
attempt to access the Internet again. To use this option,
select
Connect on Demand
. In the Max Idle Time field,
enter the number of minutes you want to have elapsed
before your Internet connection terminates. The default
Max Idle Time is
5
minutes.
Keep Alive: Redial Period
If you select this option,
the Router will periodically check your Internet
connection. If you are disconnected, then the Router
will automatically re-establish your connection. To use
this option, select
Keep Alive
. In the Redial Period field,
you specify how often you want the Router to check
the Internet connection. The default Redial Period is
30
seconds.
PPTP
Point-to-Point Tunneling Protocol (PPTP) is a service that
applies to connections in Europe only.
Internet Connection Type > PPTP
Internet IP Address
This is the Router’s IP address, as
seen from the Internet. Your ISP will provide you with the
IP Address you need to specify here.
Subnet Mask
This is the Router’s Subnet Mask, as seen
by users on the Internet (including your ISP). Your ISP will
provide you with the Subnet Mask.
Gateway
Your ISP will provide you with the Gateway
Address.
User Name and Password
Enter the User Name and
Password provided by your ISP.
Connect on Demand: Max Idle Time
You can configure
the Router to cut the Internet connection after it has been
inactive for a specified period of time (Max Idle Time). If
your Internet connection has been terminated due to
inactivity, Connect on Demand enables the Router to
automatically re-establish your connection as soon as you
attempt to access the Internet again. To use this option,
select
Connect on Demand
. In the Max Idle Time field,
enter the number of minutes you want to have elapsed
before your Internet connection terminates. The default
Max Idle Time is
5
minutes.
Keep Alive: Redial Period If you select this option, the
Router will periodically check your Internet connection. If
you are disconnected, then the Router will automatically
re-establish your connection. To use this option, select
Keep Alive . In the Redial Period field, you specify how often
you want the Router to check the Internet connection. The
default value is 30 seconds.