2-25
Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2
OL-19733-01
Chapter 2 Setting Up and Configuring the Multi Services Platform
Performing the Initial Configuration of the Multi Services Platform
To configure NTP, follow these steps:
Procedure
Step 1
Access the YaST Control Center window as described in the
“Powering On the
System and Accessing the YaST Control Center” section on page 2-12
.
Step 2
In the left panel of the YaST Control Center window, click
Network Services
,
then click
NTP Configuration
in the right panel, as shown in
Figure 2-16
.
Figure 2-16
Accessing NTP Options
Step 3
The Advanced NTP Configuration area appears, as shown in
Figure 2-17
.
