2-17
Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2
OL-19733-01
Chapter 2 Setting Up and Configuring the Multi Services Platform
Performing the Initial Configuration of the Multi Services Platform
Figure 2-8
YaST2 Window
Step 3
In the YaST2 window, make sure that the
Traditional Method with ifup
radio
button in the Network Setup Method area is selected (see
Figure 2-8
), then click
Next
.
Step 4
Take these actions:
a.
Make sure that the first controller that is listed in the Network Card
Configuration Overview area is selected, as shown in
Figure 2-9
.
Note
The network cards that appear on your system may be different than
the ones shown here.
