manualshive.com logo in svg

Cisco VIP-4R/4T, Руководство по установке и настройке

Поделиться
Скачать
Cisco VIP-4R/4T Скачать руководство пользователя страница 52

52 VIP-4R/4T Installation and Configuration

VIP Port Adapter Functions

The network end of the cable is an industry-standard connector for the type of electrical interface
that the cable supports. For most interface types, the adapter cable for DTE mode uses a plug at the
network end, and the cable for DCE mode uses a receptacle at the network end. Exceptions are V.35
adapter cables, which are available with either a V.35 plug or a receptacle for either mode, and the
EIA-530 adapter cable, which is available only in DTE mode with a DB-25 plug at the network end.
The mode is labeled on the molded plastic connector shell at the ends of all cables except V.35
(which uses the standard Winchester block-type connector instead of a molded plastic D-shell).

Following are the available interface cable options for the mode and network-end connectors for
each cable:

•

EIA/TIA-232: DTE mode with a DB-25 plug; DCE mode with a DB-25 receptacle

•

EIA/TIA-449: DTE mode with a 37-pin D-shell plug; DCE mode with a 37-pin D-shell
receptacle

•

V.35: DTE mode or DCE mode with a 34-pin Winchester-type V.35 plug; DTE mode or DCE
mode with a 34-pin Winchester-type V.35 receptacle

•

X.21: DTE mode with a DB-15 plug; DCE mode with a DB-25 receptacle

•

EIA-530: DTE mode with a DB-25 plug

For cable pinouts, refer to the section “Serial Port Adapter Cable Pinouts.”

Содержание VIP-4R/4T











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды