Cisco VG30D, Руководство пользователя

Страница: 40 / 118

4-12
Cisco VG30D Voice Gateway User Guide
OL-19276-01
Chapter 4 Management and Configuration
Administration
•
Message Waiting OFF NSI string : This option will be the default string for the Message Waiting
NSI option unless Raw has been selected, when the user must insert the string to a maximum of 30
characters.
• Message Waiting OFF call centre number : If MD110 or Both are selected in the Message
Waiting NSI option , the user may insert up to a 10-character call centre number.
•
CCM Message Waiting ON number : This destination address must be provided when a DPNSS
voice mail system is attempting to send MWI notifications to phones that are controlled by Cisco
Unified Communications Manager.
•
CCM Message Waiting OFF number : This destination address must be provided when a DPNSS
voice mail system is attempting to send MWI notifications to phones that are controlled by Cisco
Unified Communications Manager.
• DPNSS Message Waiting Call Back Messaging string : This option specifies the encoding of Call
Back Messaging - Request (CBM-R) and Call Back Messaging - Cancel (CBM-C) SIS strings.
Administration
To access Administration functions, you must have Advanced Access.
Access Control
Access Control settings allow the user passwords and Non-Use Timeout Period to be set. Alphanumeric
characters, with the exception of space, are legal for passwords. The Non-Use Timeout Period specifies
the time that is allowed for a user to be logged into the Gateway Management Interface without actively
using it before being automatically logged out when another user attempts to log in. It may be set from
3 to 15 minutes.
Software Upgrade
The Cisco VG30D Voice Gateway gets supplied with an embedded default operational software. It can
only get upgraded with software that is of the same type as the embedded software.
Software Upgrade allows a new version of the software application to be downloaded to the Cisco
VG30D Voice Gateway by using an FTP server.
The IP address of the FTP server, a User Name and a Password are all required to access the FTP server.
The directory and filename of the new application on the FTP server is also required. Selecting
Upgrade will download the new application to the Cisco VG30D Voice Gateway.
This new application will overwrite an existing previously downloaded application but not the default
application. The new application will run next time the Cisco VG30D Voice Gateway is reset, but only
if the new software has been selected by using the
Software Selection facility. Instructions on installing
the software version will be provided with the new software.
Configuration Backups
Be aware that configuration backups are release specific. After the software upgrade completes
successfully and is operational on the unit, a new configuration backup should be saved.
The procedure is as follows: