8
Note
Screws are included for attaching the brackets to the chassis, but not for installing the chassis in a rack or on a wall.
You need four additional machine screws to install the chassis in a rack. Use the screw size required by your rack.
Figure 5
19-Inch Rack-Mounting with Front Panel Forward
Figure 6
19-Inch Rack-Mounting with Rear Panel Forward
Figure 7
Telco 19-Inch Rack-Mounting with Rear Panel Forward
Step 2
Install the chassis in the rack.
Wall-Mounting the Chassis
The following warning applies only when the unit is wall-mounted:
Warning
This unit is intended to be mounted on a wall. Please read the wall mounting instructions carefully before
beginning installation. Failure to use the correct hardware or to follow the correct procedures could result in a
hazardous situation to people and damage to the system.
Statement 248
Caution
You can wall-mount the unit with either the right or left side facing up; however, the front and rear panels must be
vertical.
95915
CISCO VG224
95916
VG224-24FXS
95917
VG224-24FXS
Содержание VG224 - Analog Phone Gateway
Страница 19: ...19 ...