2-6
Installation and Upgrade Guide for Cisco Unified MeetingPlace Web Conferencing Release 6.x
OL-13418-01
Chapter 2 Installing Web Conferencing
Installation Tasks: Web Conferencing
One NIC enabled and configured with two IP addresses;
second NIC is disabled
•
Only utilizes one of the two NICs on the
system.
•
The NIC is a single point of failure.
•
This configuration is available for both HP
and IBM MCS server models
•
To configure this option, perform the
“To
Configure a Single NIC with Both IP
Addresses on the Cisco MCS Server”
procedure on page 2-7
.
Both NICs enabled, one IP address per NIC
•
Each NIC on the system is used, although one
NIC may be more heavily used than the other.
•
Each NIC is a single point of failure. If either
NIC fails, Web Conferencing will be
unavailable.
•
If the Web Conferencing server is connected
to a 100 MB/sec. network, the NIC capacity
may be exceeded in large meetings with
heavy application sharing.
•
This configuration is available for both HP
and IBM MCS server models.
•
To configure this option, perform the
“To
Configure One IP Address per NIC on the
Cisco MCS Server” procedure on page 2-8
.