2-2
Administrator Guide for Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1
OL-6571-02
Chapter 2 Installing Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1
How to Configure Cisco Unified CallManager for Use With Cisco Unified MeetingPlace H.323/SIP IP Gateway Software
•
If a firewall separates the Cisco Unified MeetingPlace Audio Server system from the IP-gateway
server, open port 5003.
Tip
The Gateway SIM communicates with the Cisco Unified MeetingPlace Audio Server system through
port 5003. This port can be bidirectional or unidirectional and can be opened on either the Cisco Unified
MeetingPlace Audio Server system or the IP-gateway server depending on your corporate security
needs.
•
Stop all previously installed Cisco Unified MeetingPlace system services.
How to Configure Cisco Unified CallManager for Use With
Cisco Unified MeetingPlace H.323/SIP IP Gateway Software
Release 5.2.1
When a caller dials a number from an IP phone, the call is first directed to Cisco Unified CallManager;
from there, Cisco Unified CallManager associates the dialed number with a route pattern that points to
the appropriate IP-gateway server.
Note
Traffic must be allowed to pass through ports 1024-65535 because the IP-gateway server uses these
ports to send dynamic TCP and UDP traffic to Cisco Unified CallManager.
Before you can install and configure Release 5.2.1, you must configure Cisco Unified CallManager to
point to your IP-gateway server. To configure Cisco Unified CallManager, you must first add a gateway;
the, assign the gateway to a route pattern.
To configure Cisco Unified CallManager for use with Release 5.2.1, perform the following procedures
in this order:
•
Adding the Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1 Server to the
Cisco Unified CallManager Configuration Database, page 2-2
•
Assigning a Cisco Unified CallManager Route Pattern to Point to the Cisco Unified MeetingPlace
H.323/SIP IP Gateway Release Release 5.2.1 Server, page 2-4
Adding the Cisco Unified MeetingPlace H.323/SIP IP Gateway Software
Release 5.2.1 Server to the Cisco Unified CallManager Configuration Database
To enable Cisco Unified CallManager to route calls to IP-gateway servers in your network, you must first
add each IP-gateway server to the Cisco Unified CallManager configuration database.
Step 1
From the Cisco Unified CallManager server, choose
Start
>
Programs
>
Cisco Unified CallManager
>
CallManager Administration
.
Step 2
Enter the user name and password in the appropriate fields and click
OK
.
Step 3
In the Cisco Unified CallManager Administration page, choose
System
> CallManager
.
Step 4
To display the Find/List Gateways window, choose
Device
>
Gateway
.
