Step 3
Press down evenly on the module to seat the module's connectors into their sockets on the motherboard.
Step 4
Using a Phillips screwdriver, tighten the two rear captive screws to 5 in-lb of torque.
Step 5
Using a T8 Torx driver, tighten the four T8 flat head screws on the sides of the compute node (2 screws per side) to secure
the module to the compute node.
Step 6
Replace the compute node top cover and reinstall the compute node into the chassis.
Cisco UCS X10c Front Mezzanine GPU Module Installation and Service Guide
9
Installing the GPU Module
Installing the Front Mezzanine GPU Module
