Cisco UCS C460, Инструкция по установке и обслуживанию

Страница: 40 / 106

3-4
Cisco UCS C460 Server Installation and Service Guide
OL-22326-01
Chapter 3 Maintaining the Server
Status LEDs and Buttons
Operations Panel LEDs and Buttons
Figure 3-2 shows the operations panel LEDs and buttons.
Figure 3-2 Operations Panel LEDs and Buttons
1 ID LED 2 ID button
3
Hard drive fault LED
4
System health LED
5
Fan fault LED
6
Power status LED
7 Power button 8 Reset button
9 NMI button
Table 3-2 Operations Panel LEDs
LED Name State
ID
•
Off—The ID LED is not in use.
•
Blue and blinking—System ID is active via the remote ID button.
• Blue and steady—System ID is active via the local ID button.
Hard drive fault
•
Green—No hard drives have a fault.
• Amber—At least one hard drive has failed.
System health
• Green—The system is not in fault.
•
Amber and steady—The system is in moderate fault.
• Amber and blinking—The system is in severe fault.
Fan fault
•
Off—All fan modules are operating properly.
• Amber—At least one fan module has a moderate fault.
•
Amber, blinking—At least one fan module has a severe fault.
Power status
•
Off—The server is in standby power mode or no power is present.
•
Green—The server is in main power mode.
1 2 7
8
9
3 5
197617
4 6