manualshive.com logo in svg

Cisco UCS C260 M2, Руководство пользователя

Поделиться
Скачать
Cisco UCS C260 M2 Скачать руководство пользователя страница 19

Cisco UCS C260 M2 High-Performance Rack-Mount Server

CONFIGURING the SERVER

19

.

Approved Configurations

(1) One or Two RAID Controller Cards

■

Choose one or two R2XX-PL003 LSI MegaRAID SAS 9261-8i RAID controllers listed in 

Table 8

. 

You will be able to control from one to sixteen drives, depending on the drive bay(s) 
selected and the type of installed transition card.

Caveats

■

If you choose one RAID controller card, it is installed in PCIe slot 3.

■

If you choose two RAID controller cards, they are installed in PCIe slots 3 and 5.

■

If you selected two drive bays with nonexpander transition cards, you will need two RAID 
controllers to control the maximum number of drives (16). All other drive bay configurations 
require only one RAID controller card to control the maximum number of drives that can be 
installed in the drive bays.

■

You can choose an optional RAID configuration (RAID 0, 1, 5, 6, or 10), which is 
pre-configured at the factory. If you do not choose a RAID configuration, the disks will be 
configured as a JBOD.

RAID Configuration

R2XX-RAID0

Factory pre-configured RAID striping option

 

Enable RAID 0 Setting. Requires a minimum of 1 hard drive.

R2XX-RAID1

Factory pre-configured RAID mirroring option

 

Enable RAID 1 Setting. Requires exactly 2 drives, with same size, speed, capacity.

R2XX-RAID5

Factory pre-configured RAID option

 

Enable RAID 5 Setting. Requires minimum 3 drives of same size, speed, capacity.

R2XX-RAID6

Factory pre-configured RAID option

 

Enable RAID 6 Setting. Requires minimum 4 drives of same size, speed, capacity.

R2XX-RAID10

Factory pre-configured RAID option

 

Enable RAID 10 Setting. Requires an even number of drives with a minimum of 4 

drives of same size, speed, capacity.

NOTE:  

No RAID option can be chosen if you have one of the following configurations:

• A mix of SAS and SATA drives
• No  drives

Table 8   Available RAID Options 

(continued)

Product ID (PID)

PID Description

Содержание UCS C260 M2























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды