Cisco UCS C210 M2 Скачать руководство пользователя страница 18

Страница: 18 / 62

Cisco UCS C210 M2 General-Purpose Rack-Mount Server

CONFIGURING the SERVER

R2XX-PL003

LSI MegaRAID SAS 9261-8i (RAID 0, 1, 5, 6, 10)

■

Takes up one of five available PCIe slots (must be installed in slot #4)

■

Supports up to eight internal SAS or SATA drives with the factory default SAS

Extender installed. You can mix SAS and SATA drive types, but you cannot mix

HDD and SSD drive types.

■

Supports up to 16 internal SAS or SATA drives with the optional SAS Expander

installed. You can mix SAS and SATA drive types, but you cannot mix HDD and

SSD drive types.

■

Includes 512 MB of write cache

■

Battery backup option available (see the battery backup PID section in this

table)

■

Factory-configured RAID options: RAID 0, 1, 5, 6, 10 (see the RAID PIDs

section in this table)

RAID Battery Backup Option (not available with mezzanine card)

R2XX-LBBU2

Battery Backup

RAID Configuration (note: Mezzanine card supports only RAID 0, 1, and 1E)

R2XX-RAID0

Factory pre-configured RAID striping option

Enable RAID 0 Setting. Requires a minimum of 1 hard drive.

R2XX-RAID1

Factory pre-configured RAID mirroring option

Enable RAID 1 Setting. Requires exactly 2 drives, with same size, speed, capacity.

R2XX-RAID5

Factory pre-configured RAID option

Enable RAID 5 Setting. Requires minimum 3 drives of same size, speed, capacity.

R2XX-RAID6

Factory pre-configured RAID option

Enable RAID 6 Setting. Requires minimum 4 drives of same size, speed, capacity.

R2XX-RAID10

Factory pre-configured RAID option

Enable RAID 10 Setting. Requires an even number of drives (minimum 4 drives) of

same size, speed, capacity.

NOTE:

No RAID option can be chosen if you have one of the following configurations:

• A mix of SAS and SATA drives
• No drives

Table 6 Available RAID Options

(continued)

Product ID (PID)

PID Description

Содержание UCS C210 M2































































Результаты поиска

Содержание UCS C210 M2

Отзывы:

Бренды по названию

Популярные бренды

Cisco UCS C210 M2, Технические характеристики

Результаты поиска

Содержание UCS C210 M2

Отзывы:

Бренды по названию

Популярные бренды