S e n d d o c u m e n t c o m m e n t s t o u c s - d o c f e e d b a c k @ c i s c o . c o m
20
Cisco UCS B200 Blade Server Installation and Service Note
OL-22473-02
Removing a Blade Server Cover
Figure 10
Removing The Heat Sink and Accessing the CPU Socket
Installing a CPU and Heat Sink
Before installing a new CPU in a server, verify the following:
•
The CPU is supported for that model server.
•
A BIOS is available and installed that supports the CPU/DIMM and server combination.
•
The service profile for this server in UCS Manager will recognize and allow the new CPU. This is
especially important if you have been using a single processor and install a second processor.
To install a CPU and heat sink, follow these steps:
Step 1
Place the CPU on the base with the notches aligned to the pins on the base. See
Figure 11
, callout 1.
4
5
1
1
3
1
1
2
252003
